Quote:
Originally Posted by nmlferreira
What I found out was that with the inverter off I won't have TVs, power in the bedroom and power to the outdoor fridge. Even when connected to the Shore. this is why I keep it on all the time.
Am I doing something wrong on my 2016 Thor Freedom Elite?
Also I haven't found any information about what is going on when I keep the Select button pressed for more than two seconds and different warnings appear in the small screen. Any ideas?
I'll try to take a picture.
|
Sounds to me like the transfer switch may not be allowing shore power to pass through the inverter. Read section or page 4-3 of manual, which states that whether on or off, shore power should pass through (bypass) the inverter.
http://www.xantrex.com/documents/Pow...ork)%20(1).pdf
Just to be safe, I would check the model and serial numbers to make sure your XM1800 has a built-in transfer switch. As far as I know they all have one, but I'm no expert and don't know for certain. It may also be possible wiring of transfer switch is not correct.