Quote:
Originally Posted by Whirnot
As stated above, there is a Camera box under the access panel. I just learned a bunch about it as I am installing a larger multi monitor. The cameras themselves are an aviation connector and if it is screwed in correctly is probably not your problem. The output wire goes to the Stereo head. The monitor wire is unused it has a short connector that isn't hooked up. The power in connector has a bunch of wires. They are actually, Power, ground, and the trigger wires that cause the screen to come on during reverse etc. I had some of those wires that we a little loose in the block. I would look there or on the back of the receiver. You can also remove the tray above the radio be lifting off the rubber pad and removing the two small screws under it.
Hope this helps
|
Thanks! I forgot all about the top tray. Much easier to get to all radio wires.