radio volume turns off when side video cameras turn on

[tommycpg]

Originally Posted by SuperD

Our 2017 Windsport was the same. I installed a 9” quad view monitor on the dash and can now see all cameras at the same time, problem solved. Before installing the monitor I looked thru the radio menus and didn’t see anything referring to volume or turn signals.

Where did you get the 9” quad view monitor from and did you or they installed it. I hate getting into the wires. So much could go wrong.

Thanks,
Tommy G
.

[TimmyB]

Originally Posted by tommycpg

Where did you get the 9” quad view monitor from and did you or they installed it. I hate getting into the wires. So much could go wrong.

Thanks,
Tommy G
.

Tommy, I did the same thing in mine and I did it all myself, and I am not wiring genius. I bought a 9" quad view monitor from Amazon, three video cable converters from RearViewSafety.com. Total investment was under $120. The only things that haven't gone to plan are: (1) there is a bit of noise on the screen when the left turn signal is on, and (2) the programming of the monitor is set to automatically flip whatever image is on camera 1. The second one was a pain in the rear because cameras 2 and 3 were flipped the opposite direction. Once I discovered this was only camera 1, I simply moved camera 1 to the camera 4 input, which does not flip the screen.

I have many more details in this post:
http://www.thorforums.com/forums/f27...pit-18648.html

Let me know if you would like step by step instructions. It wasn't that complicated.

[tommycpg]

Originally Posted by TimmyB

Tommy, I did the same thing in mine and I did it all myself, and I am not wiring genius. I bought a 9" quad view monitor from Amazon, three video cable converters from RearViewSafety.com. Total investment was under $120. The only things that haven't gone to plan are: (1) there is a bit of noise on the screen when the left turn signal is on, and (2) the programming of the monitor is set to automatically flip whatever image is on camera 1. The second one was a pain in the rear because cameras 2 and 3 were flipped the opposite direction. Once I discovered this was only camera 1, I simply moved camera 1 to the camera 4 input, which does not flip the screen.

I have many more details in this post:
http://www.thorforums.com/forums/f27...pit-18648.html

Let me know if you would like step by step instructions. It wasn't that complicated.

Yes please, I am kinda a dunce when doing something like this.

[TimmyB]

Originally Posted by tommycpg

Yes please, I am kinda a dunce when doing something like this.

Sent you a PM.