Quote:
Originally Posted by thutchis
Thanks to all the posters on this thread who have inspired me to come up with what I think is a great solution to the ridiculous cup holder Thor has put into some of their coaches.
Attachment 6050
I found these sewer/drain hub pvc couplers at the hardware. They are thinner than regular schedule 40 PVC fittings. The outside diameter is 3 1/2" and inside 3 1/4". They fit very snugly in the forward holders. I wiped them down with acetone to break the glaze and painted them satin black with Krylon Fusion spray paint.
Attachment 6051
Unfortunately, in the rear cup holders they do not fit snugly and will flop around when a water bottle is put in them. So I tried to find a way to make them snug in the real holders. I found these aluminum sprinkler pipe gaskets that work perfectly.
Attachment 6052
They are a 3" "Wade Rain" gasket and can be found at a commercial agricultural irrigation dealer or ordered here. A little dish soap for lube and then stretch and slide over the couplers about half way down.
So now I put the couplers in the forward holders with the gasket on top.
Attachment 6053
And flip them over to use them in the rear holders where they now fit very snugly and will securely hold a full water bottle without falling over.
Attachment 6054
PM me if you have a specific questions.
|
i just did this. perfection. my big yeti doesnt move, its amazing. thank you!