Figured Out How to Power a Front Fan
I’ve seen a few comments throughout the forums asking why Thor didn’t put a powered fan in the front of a Magnitude/Omni. Well, I figured out how to get power there.
I removed the curtain track and wooden molding, then tapped into a constant 12v source-the push button lights in the overhead bunk. Tucked the wires back into the roof area, then drilled a hole in the fan base and “drilled” out a small channel through the foam in the roof (I used a small wire fishing rod which was only about 10 inches long). Pulled a wire loom and wires through it and viola.
I will be mounting the fan tomorrow. I checked the power and good to go.
Fyi, those wire crimps they used on those push button LED lights, came disconnected by using a very small amount of force. So I redid them with shrink tube crimps.
__________________
|