Sail switch

[Ninjatoto]

Doesn’t look anything like furnace I have the sail switch is on the back side of the blower and the circuit board wiring is so short I can take the wing nut holding it off but can’t pull it out to access it

[OldWEB]

Originally Posted by Ninjatoto

Doesn’t look anything like furnace I have the sail switch is on the back side of the blower and the circuit board wiring is so short I can take the wing nut holding it off but can’t pull it out to access it

You pull the wire connector off of the circuit board first then.

[Ninjatoto]

I did but there are other connected to hidden end of the board I can’t reach, as I said I’ll probably have to pull the furnace to get access to just about everything, thank you Thor engineers!

[OldWEB]

Originally Posted by Ninjatoto

I did but there are other connected to hidden end of the board I can’t reach, as I said I’ll probably have to pull the furnace to get access to just about everything, thank you Thor engineers!

I did a search and did not find a board that has a 2nd connector.... Can you post a picture?

[Ninjatoto]

We’re leaving on a monthlong trip Friday to Florida and we have a electric heater to knock the chill out of the air and I’ll deal with the furnace when we get back. P.S. we bought the ACE when it was one yr old and we have found several (modifications) the original owner did so this doesn’t surprise me anymore when I find something like this. The dash wiring is full of splices and jumper wires as is the fuse box. So yeah I’ll deal with this next mess later.