Originally Posted by Tom Brown
how do I remove the condensation from inside the fog light on the 2018 Thor Axis
The fog lights can be replaced by unscrewing the fixture from the back of the light assembly. When you do that, You can dry out the lens assembly by just leaving it and letting it dry or using a hair dryer on low. When you put it back together, make sure that the seal between the light assembly and the lens is water tight so you donít get water in there again. In mine the light assembly had just worked loose and let water in. After separating the fixture from the lens, drying out t out and reassembling it, I never have had the problem again.