Quote:
Originally Posted by Laco
Had one added to our shower, its on the outside wall, there are small studs in the wall, so angle it so you can get both ends attached to one.
|
Ditto. The framing is very thin, 3/4". You want to pilot hole for your screws. If you need more weight bearing, attach the grab rail first to a 1x4 and screw it to the "stud" but with panel adhesive to grip to the wall.
I used this one: https://www.amazon.com/RV-Designer-W.../dp/B002UC15TG
__________________
I'm wearing trifocals now but my hindsight is 20/20.
*************
Bilsteins and Sumos front and rear...HUGE! FatMat and Hoodliner...HUGE!
Hellwig sway bars F&R, 235/85 Hankook ATM, alignment...HUGE!!!
Battery watering, 260watts Solar and BigFeets to make life easier.
|