Quote:
Originally Posted by CampTap
As a commercial electrician I would advise against leaving wires coiled up. This creates a "choke" on your power causing heat at the coils. Even with insulated cables the EMF will build in the coil creating resistance and heat. A coil of wire is basically a transformer without a core. If you were to take a steel bar and put in in tbe middle of that coil you will read voltage off the bar in accordance with your turns ratio (how many coils of wire around the 1 bar ie 4-5 to 1) when you take that rod out it builds what we call a choke which limits the flow of amperage in high voltage circuits. They also work in low voltage but are not used as often or are just called resistors. These create heat and can damage your insulation. Anyway Im blabbering.
Have a good day
|
As an EE, trained in the USAF, I agree 100% with CampTap.