Quote:
Originally Posted by m1noel
The removal was pretty straight forward except the the video did not mention that there could be a plate inside the coach with screws securing the column from the inside. I only discovered this when I tried to move the column out as per the video. Also, the slide in the video had screws. Thor used rivets so they all had to be drilled out.
|
I am about to embark on this as well.
Did you put it back together with rivets or did you use panhead screws like the Lippert instructions suggested? Since the top two rails were not parallel I am guessing you had to drill new holes, did you re use the bottom holes and did you have any issues doing that (like screws that would not tighten?).