Thor Forums

[schreinertms]

bigben - You mentioned this in your post:
"Take a page from our book also, make sure that the drain hose is even with the back edge of the W/D. If it gets lower, the W/D keeps fill and emptying. It eventually does wash but takes about 4 hours."
Not sure I understand exactly what you mean here. I just installed a 2100XC in my 37TB and ended up moving the hot/cold valves and electrical outlet to the center closet for easier access to shutting off the water and electricity. I left the drain where it was and added about 7 inches of PVC to the drain so it could be reached once the W/D was installed. I secured the W/D drain to the PVC drain without cutting the W/D drain hose, left it the original length. Do you see a potential issue here?
The dryer vent I also routed over to the center closet so I can poke a hole in the fiberglass wall so it penetrates thru a solid black color on the outside of the slider. The outside vent cover will be painted black so it blends in nicely with the outside color scheme.