Remco Aquajet problems
We just upgraded to the AES 3.4 GPM before a trip. The first two days it performed well, except a couple times the pump continued running when no water was being drawn. We switched it off then back on to “reset” to normal operation.
The third day it lost the majority of volume and pressure. After an initial burst of line pressure the water goes to a trickle although the pump is running. I checked the water lines in and out for kinks, and made sure the pre-filter is clean. It flows well when hooked to water. It still occasionally continues running until switched off.
Appreciate any advice or things to check.