Quote:
Originally Posted by 16ACE27
Not always true. In some chassis you physically can not connect the OEM rod to the second hole; you either need a longer rod or, as some have done, install plates on the frame to move the connection point.
|
I've never heard of or seen where the links would not connect to the bar. Yes some people had problems connecting making it more difficult but it did get done.
Pic of my plates. The metal bar cost $25, I gave my buddy $20 to weld them together, the 2 additional flange bolts and flange nuts (total of 4 sets. Two on each side) were $10. So for $55 my chf was done and the sway bar is almost level.
Second pic is the diagram to make the plates if someone wants to do it.
BUT use two 4" plates not 3 and overlap 1/2" this diagram was made by someone who extended the links so the plates are smaller for his coach
Jerry