We have a Aria but it sounds like you have a good handle - couple of suggestions below:
From what I read and understand here's the process when we pull into a site:
1. Engine running, brake on, in neutral.
2. Move suspension air lever from auto to lower. This should dump the air bags and lower the rig.
3. Once rig is lowered use Ultra Level to level the rig. There is setting that dumps the air bags automatically but obviously this isn't happening. (doesn't happen on the Aria either)
We connect the 50 amp power before extending slide outs.
4. Once the jacks are down and the rig is leveled, go ahead and extend the slide outs, connect power, water, sewer, etc, and have a beer.
When it's time to go:
1. Retract the slide outs, disconnect everything.
2. Start engine, brake on, in neutral.
3. Retract jacks.
4. Move suspension air lever from lower to auto. This should inflate bags and raise rig.
Good luck and congratulations on your new rig!
__________________
|