My Winegard G3 has two Wally capability. But I only use one Wally which is routed the same signal to all 3 TVs
If you’re not aware yet...the “slave” Wally (#2) has major limitations in a Dome dish set-up.
That is, every time the channel is changed to a different satellite on the “master” (#1), the “slave” (#2) must go thru an entire reset/restart process making the “slave” virtually worthless.
That’s because the slave must always use the same satellite as the master.
You can watch different channels as long as they’re coming from the same satellite. And the master controls the Dome dish.
If you want two Wally’s always available for all channels...go with a 2nd Dome dish or, better yet, the $1500 Trav’ler.
__________________
'17 Vegas 24.1
Fallbrook, CA
|